SP-2
INSTRUCCIONES DE INSTALACIÓN
Herramientas necesarias
Reúna todas las herramientas y piezas requeridas antes de
comenzar con la instalación. Lea y siga las instrucciones
proporcionadas para las herramientas listadas a
continuación.
PARTS INCLUDED
Destornillador
Phillips nº2
Lápiz
Punzón o
perforadora
Estructura Ajustable
Conducto Inferior
Soporte Superior
Tornillos Phillips con
Cabeza Redonda
Tornillos Phillips con
Cabeza Plana
Soporte
Antivolcaduras
Soporte Inferior
Plantilla
Taladro con broca
de 7⁄64” o nº 35
Cinta métrica
Tijeras (opcional)
Requerimientos de ubicación
Herramientas y piezas
El horno de microondas puede instalarse sobre un horno
empotrado de pared. Asegúrese de que haya un mínimo
de 3 '' (7.6 cm) entre la parte superior del recorte del horno
inferior y el piso recortado del horno de microondas. Ver Fig.
1 abajo
El horno de microondas también se puede instalar en un
gabinete solo (sin un horno incorporado a continuación). Para
un mejor acceso de usabilidad, debe haber un mínimo de 36
'' (91.4) desde el piso hasta el piso del horno de microondas.
Deje un espacio libre de al menos 1-9/16 '' (4,0 cm) por
debajo del corte del horno de microondas. Vea la figura 2 a
continuación.
En cada caso, debe haber un mínimo de 2 '' (5.1 cm) entre la
abertura del corte y un gabinete o superficie superior. Ver las
dos figuras a continuación.
A. Gabinete superior
B. Abertura de horno
microondas
C. Abertura de horno inferior
D. Gabinete inferior
E. Piso
3"
(7.6 cm)
B
B
D
36"
(91.4 cm)
C
2"
(5.1 cm)
2"
(5.1 cm)
1
"
(4.0 cm)
A
E
9/16
A
Fig. 1
Fig. 2
Summary of Contents for 22003
Page 2: ......