Kenmore 125.22614610, Use & Care Manual

Page: 22 / 52

- 22 -
End Cap
End Cap
Belt Path
Brush Unit
TO CLEAN AGITATOR:
NOTE: In order to keep cle?
high and to prevent damage to your vacuum
cleaner,
the agitator must be cleaned every
time the belt is changed .
The agitator must also be cleaned accord-
ing to the following schedule:
Vacuum Cleaner Use Clean Agitator
HEAVY - every week
(used daily)
MODERATE - every month
(used 2-3 times/week)
LIGHT - every 2 months
(used 1 time/week)
IMPORTANT
T'#!*vacuum cleaner from
electrical outlet.
Check and remove hair,
string and lint build-up frequently in the
PowerMate
®
agitator and end cap areas.
Remove any dirt or debris in the belt path
area or in the brush roller area.
Carefully remove any string or debris lo-
cated on the agitator or end caps.
AGITATOR ASSEMBLY
LIGHT BULB CHANGING
WARNING
Electrical Shock Or Personal Injury
Hazard
T'#!*vacuum cleaner
before performing maintenance to the
vacuum cleaner. Failure to do so could
result in electrical shock or personal
injury from the vacuum cleaner
suddenly starting.
CAUTION
Do not plug in or turn on until the vacuum
cleaner is completely reassembled.
CAUTION
Do not use a bulb rated over 9W (13V).
During extended use, heat from the bulb
could overheat surrounding plastic parts.
1. Remove PowerMate
®
cover as shown in
BELT CHANGING AND AGITATOR
CLEANING
(pages 21-22).
2. Remove the light
bulb by pulling
straight out.
3. To replace the
light bulb,
carefully insert
fully into slot.
4. Reinstall PowerMate
®
cover as shown in
BELT CHANGING AND AGITATOR
CLEANING
(pages 21-22).
NOTE: See PARTS AND FEATURES (page 5)
for Bulb number.
Pull out to
left side
Push in
to right