- 11 -
3.
Lower handle from upright position by
pressing on the handle release pedal.
4.
Select a pile height setting by pressing
the small pedal on the rear of the
PowerMate
®
. The pile height setting shows
on the indicator.
SUGGESTED PILE HEIGHT
SETTINGS:
For best deep down cleaning, use the
XLO
setting. However, you may need to raise the
height to make some jobs easier, such as
scatter rugs and some deep pile carpets,
and to prevent the vacuum cleaner from
shutting o. Suggested settings are:
HI –
Shag, deep pile, super-soft or ultra-plush
carpets, and scatter rugs.
MED –
Medium to deep pile.
LO –
Low to medium pile.
XLO –
The preferred setting for many carpets
Attention:
Refer to your carpet manufacturers
cleaning recommendations. Some more
delicate carpets may requirethat they be
vacuumed with the PowerMate
®
agitator
%
NOTE:
'
+<=>>"
FLOOR
position
Handle
Release Pedal
5.
Select a switch position on the handle.
CARPET -
turns on
both the canister
motors.
The PowerMate
®
agitator will spin.
OFF -
Slide the switch
all the way back to
canister and the
PowerMate motors.
FLOOR -
turns on
the canister motor
only. The PowerMate
®
agitator will not spin.
OFF
OFF
FLOOR
CARPET
OFF
CAUTION
DO NOT leave the PowerMate
®
running
in one spot in the upright position for
any length of time. Damage to carpet
may occur.
TELESCOPING WAND
The telescoping wand length is adjustable
and requires no assembly. To adjust,
simply push down on the wand adjust
button and slide the upper portion of the
telescoping wand to the desired height.
NOTE:
When adjusting the telescoping
wand length you may have to hold the
PowerMate
®
with your hand or foot.
Wand Length
Adjust Button
Keep Hand
AboveThis
Tab
and the PowerMate
®
NOTE -
When this
switch is in the
FLOOR
position,
the headlight
DOES
NOT
function since
no electricity ows
to the PowerMate
®
.
Summary of Contents for 125.22614610
Page 26: ...NOTES 26 ...
Page 52: ......
