4-8
n
COMPONENT ACCESS
Ice Maker Top Components (cont.)
6. Lay the control housing on the board and blanket
previously positioned. While supporting top remove the
ground wire. See
Figure 23
.
rEmOviNg usEr iNTErfacE BOard
8. Release retainers to remove UI board. See
Figure 25
.
FIGURE 23
t,/Z>WKK>KZWKZd/KE
KE&/Ed/>
ϮϮ
Zz^d>ϱϬη/D,/EͲϮϬϭϯdϯ
^^/E'KEdZK>KDWZdDEd
rEmOviNg TraNsfOrmEr
7. Remove 2 screws and connectors.
NOTE:
The transformer doesn’t have to be removed to
make voltage and resistance checks. See
Figure 24
.
FIGURE 24
t,/Z>WKK>KZWKZd/KE
KE&/Ed/>
Ϯϯ
dZE^&KZDZ
Zz^d>ϱϬη/D,/EͲϮϬϭϯdϯ
ZĞĚͬZĞĚϭϮ͘ϴs
>ĞƐƐƚŚĂŶ͘ϮK,D^ZĞƐŝƐƚĂŶĐĞ
ůƵĞͬůƵĞϵ͘ϰs
>ĞƐƐƚŚĂŶ͘ϮK,D^ZĞƐŝƐƚĂŶĐĞ
ůĂĐŬͬtŚŝƚĞϭϮϬs
ϰK,D^ZĞƐŝƐƚĂŶĐĞ
t,/Z>WKK>KZWKZd/KE
KE&/Ed/>
Ϯϰ
h^Z/EdZ&KZZDKs>
Zz^d>ϱϬη/D,/EͲϮϬϭϯdϯ
t,/Z>WKK>KZWKZd/KE
KE&/Ed/>
Ϯϰ
h^Z/EdZ&KZZDKs>
Zz^d>ϱϬη/D,/EͲϮϬϭϯdϯ
FIGURE 25
accEssiNg ThE cONTrOL cOmparTmENT
NOTE:
This procedure will prove challenging the first time
attempted.
5. 5 hex head screws will need to be removed while
supporting the top. Grasp the center of the top with left
hand to support top. Screw # 5 needs to be the last to
be removed. When the last screw is removed the control
housing will separate from the top. See
Figure 22
.
FIGURE 22
t,/Z>WKK>KZWKZd/KE
KE&/Ed/>
Ϯϭ
^^/E'KEdZK>KDWZdDEd
Zz^d>ϱϬη/D,/EͲϮϬϭϯdϯ
ϯ
ϰ
ϱ
Ϯ
ϭ
ϱ
t,/Z>WKK>KZWKZd/KE
KE&/Ed/>
Ϯϭ
^^/E'KEdZK>KDWZdDEd
Zz^d>ϱϬη/D,/EͲϮϬϭϯdϯ
ϯ
ϰ
ϱ
Ϯ
ϭ
ϱ
