Kendrion Binder Magnete GmbH
Operating Instructions 76 ..P..B00
Last updated: 30 Dec. 2009
Page 21
4.2 Spare parts and accessories
Designation, order number
Size
Friction disc (5)
Flat seal (9)
O-ring (16)
Fixing screw (10)
Type
S
S
S
A
10
73 24111E00400
76 24E11B00044
602633
304046
11
73 24111E00400
76 24E11B00044
602633
304046
13
73 24116E00400
76 24E11B00044
602635
3040071
16
73 24116E00400
76 24E11B00044
602635
304071
19
76 14124E00400 / 76 24124E05400
1)
76 24E11B00044
602637
304107
24
76 14124E00400 / 76 24124E05400
1)
76 24E11B00044
602637
304107
Table 21/1: Spare parts (S) and accessories (A)
1)
Friction disc with special friction material for increased switching work W
Warning!
Maintenance and repair work and adjustments must be performed by the manufacturer or by
authorised repair shops (see Section 12) only!
5. Condition at delivery
Upon receipt of the shipment, the spring-applied brake must be checked for transit damage before storage.
Ordered accessories (e.g. fixing screws) are delivered together with the brake. The spring-applied single-disc
brake is delivered ready for mounting with factory-adjusted M
2
rated torque and factory-adjusted air gap 's'.
Note!
If the brake is not installed immediately upon delivery, it must be stored in a dry, dust-free and vibration-proof
place.
6. Emissions
6.1 Noise
The spring-applied single-disc brake produces switching noise during engagement and release. The noise
level is determined by the installation conditions, circuitry (e.g. with overexcitation) and air gap. Depending
on the installation position, operating conditions and quality of the friction surfaces, clearly audible vibrations
(squeaking) may be produced during braking.
6.2 Heat
Braking operations and gradual heating of the field coil cause the solenoid housing temperature to increase
substantially. Under adverse conditions, the surface temperature may rise to well over 100°C.
Caution!
Risk of burns in case of contact with hot surfaces! Suitable covers and hand guards must be installed to
provide protection against accidental contact.