background image

15

14

Still

There must be a cassette in the video.

VCR

Still picture from playback.
Each press of the button moves the picture on one frame. 

Press the play button to switch back to normal playback.

Variable picture search

VCR

VCR

-

Keep pressing

√√

to vary the forward search speed.

Keep pressing

œœ

to vary the rewind search speed.

Pressing the above buttons will vary the search speed in
two speeds.

Press 

to switch back to normal playback.

Variable slow motion

VCR

Starting from playback you can keep pressing 

■ 

to

control slow motion speed in six steps.

Press  

√ 

to switch back to normal playback.

After approximately five minutes on still, the cassette will automatically switch to normal playback.

If the still picture is jumping, you can steady it by using the 

PR+

and 

PR-

button.

Finding new recordings (index scan)

The video index search system allows you to find the beginning of any recording you have
made on your video. Your video automatically records index marks on the tape whenever a
recording is started.

Press 

INDEX +

or 

INDEX –

to search forwards or

backwards.

The video will now wind to the beginning of a recording,
play it for about 6 seconds, then wind on to the next one.

When you see the recording you want to watch,
press 

PLAY

.

FF  SP                    
INDEX  01

0:11:09

16:9 Wide-screen format

16:9 Wide-screen format is only available through wide-screen broadcasts. Your TV must have 16:9
function. You must connect your TV to the video using an A/V scart lead and the video must be in
VCR mode. (See page 2, diagram 2.)

1

Choose ‘16:9 set’ by pressing 

MENU

. Press 

PR-

twice to ‘VCR Set Up’ then 

OK

.

Press 

PR+

three times then 

OK

.

-ON   : The video will play or record all broadcasts in 16:9

format. 4:3 broadcasts will be converted to 16:9
format.

-OFF  : The video will play or record all broadcasts in 4:3

format only.

2

3

VCR SETUP

CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF

PR+/-:SELECT
OK:CONFIRM       MENU:END

16:9 SET

AUTO
OFF
ON

PR+/-:SELECT
OK:CONFIRM       MENU:END

Press 

PR-

to choose the setting you want, for example,

-AUTO, -ON or -OFF. Confirm the setting with 

OK

.

16:9 Set
-Auto : This video automatically detects the program

format (16:9 or 4:3) and records or plays this
program in the same format.

For the above formats to work your TV must be able to automatically detect a 16:9
broadcast. In the case of turning 16:9 format off, your TV may override this decision and
display the picture in 16:9 format.

Summary of Contents for ST737


















Reviews: