7
10. INSTALLATING THE
MOUNTING PLATE
Step 1. Remove 1 of 4 screws from the
mounting ring and loosen the other 3 screws.
(Do not remove)
Step 2. Place the key holes on the mounting
plate over the 3 screws previously loosened
from the mounting ring, turn mounting plate
until it locks in place at the narrow section of
the key holes. Secure by tightening the 3
screws previously loosened and the one
screw previously removed. (Fig. 13)
Figure 13
Mounting
plate
Mounting
ring
Screws
11. ATTACHING THE
17W LED ASSEMBLY
NOTE:
Before starting installation, disconnect
the power by turning off the circuit breaker or
removing the fuse at fuse box. Turning power
off using the fan switch is not sufficient to
prevent electric shock.
Figure 14
Screw
Mounting
plate
17W LED assembly
White wire
connectors
Step 1. Remove 1 of 3 screws from the
mounting plate and loosen the other 2
screws(Do not remove). (Fig 14)
Connect white wire from motor to white wire
from the 17W LED assembly. Connect black
wire from motor to black wire from the 17W
LED assembly.
Step 2. Place key holes on the 17W LED
assembly over the 2 screws previously
loosened from the mounting plate, turn the
17W LED assembly until it locks in place at the
narrow setion of the key holes. Secure by
tightening 2 screws previously loosened and
the one previously removed. (Fig 14)
Black wire
connectors
