Figure 17
Figure 18
9
14. Operation of your
Ceiling Fan:
Step 1: Make sure power is restored to the fan
unit as during installation it was most likely
turned off at the wall switch or breaker box.
Note: The fan is controlled by the remote
system only. No other wall control devices such
as dimmers, fan controls, etc. are compatible
with this system. If there is a switch that controls
the power to this unit make sure it is only an
on/off toggle or rocker switch.
Step 2: Install the 12volt battery into the hand
held transmitter (Figure 17) as shown in (Figure
18). Make sure the battery is secure with the
matching +/- terminals. The remote hand set
will have illumination lights that will come on
once a function is pressed. This light indicates
the remote has a good battery. If you do not see
this illumination please change out the battery.
Step 3: Begin testing the fan functions with the
remote control (Figure 17). See operation
details below.
• Fan Buttons 1-6: The higher the number the
faster the fan should turn. Press one time on
each button to the desired speed. #1 is the
lowest speed and #6 is the highest speed.
• Fan Off Button: Press once to turn fan off.
• Light Button: Press once to turn light on/off.
• Reverse Button: Is in the back of the hand
held by the battery compartment (Figure 18).
Press once to reverse the fan.
Reverse Button
Bouton à Inverser
