www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United State swith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
2
INSTALLATION INSTRUCTIONS
CTD_F-7277_103018
LED Module Replacement
1. To remove lens compress sides together as shown. See Figure 1.
2. Remove the red and blue wires by pressing the connector at the depressed spot. See Figure 5.
3. Remove the screws securing the LED module and replace by securing with the removed screws.
4. Push the wires into the connector-
Red wire – (+) connector
Blue wire- (-) connector
5. Replace lens by compressing sides and inserting into housing.
COMPRESS LENS TO REMOVE OR INSTALL
Figure 1
Figure 2
Figure 3
2.00
4.00
96"
48"
1.6"
24"
44.8"
24"
(4) .281" diameter
48"
24"
1.6"
44.8"
7/8" diameter KO
7/8" diameter KO
(2) .281" diameter
4' MOUNTING HOLES/WIRE-FEED
8' MOUNTING HOLES/WIRE-FEED
