3
Specifications subject to change without notice
1. Seidentopf Binocular Head 2. Eyepiece Tubes
3. Bridge Assembly 4. Bridge Assembly Head Socket
5. Fine & Coarse Focusing 6. Stage
7. Microscope 8. Microsocpe
Microscope Preparation and Assembly
Step 1. Open packing boxes carefully. There will be two large boxes,
each containing a microscope base, and two smaller, one with the
bridge assembly and one with the Seidentopf binocular head that fits
onto the bridge. Lift each microscope base out of shipping container.
Note that the serial numbers on the bottom of the units end in either
an L (left base) or an R (right base). Remove all packing materials on
stage and illuminator. Unpack the bridge assembly and the
Seidentopf binocular head. Place microscopes side by side as
shown, with the "L" scope to the left, and the "R" scope to the right
and with the arms of the miscroscopes toward the back.
Sub-Stage Transmitted Lighting
(Below-Stage Light)
X
x/y Floating Stage
X
Powered by Ken-A-Vision Cool Lighting
X
Power source- NiMH Batteries
X
Light Rheostat to adjust lighting
X
Contour Base
X
Catalog Number
T-1924C
1.
2.
3.
4.
5.
6.
8.
7.
