X8 SuperSnake GT02XW
Operating manual - EN
3.
Lock the adjustment by closing the pressure arm.
Excessive pressure flattens the filler wire and may damage coated or cored filler wires. Excessive pressure
also unnecessarily wears the feed rolls and increases gearbox load.
The use of knurled feed rolls in the X8 MIG Welder’s wire feeder unit with the X8 SuperSnake GT02XW sub-
feeder is not recommended.
When the X8 SuperSnake GT02XW subfeeder is selected in the X8 wire feeder settings, wire inch feature
will feed the wire automatically to the system when the Wire inch button on the wire feeder panel is
pressed.
Filler wire types Feed roll profile
Filler wire diameter, ø mm Adjustment (x100N)
Fe, Ss
V-groove
1.0
1.5−2.0
≥ 1.2
2.0−3.0
Fc, Mc
V-groove, knurled
≥ 1.2
1.0−2.0
1.6
2.0−3.0
Aluminum
U-groove
1.2
1.0−1.5
1.6
2.0−2.5
© Kemppi
12/35
Rev. 1901