Master 315
Operating manual - EN
>> This is always on in power source models where the VRD function is locked on.
•
VRD symbol red (blinking): There is a fault with VRD that prevents welding
•
VRD symbol off: VRD is off.
Home view in TIG
Depending on your welding settings, the following are shown:
1.
Welding process
2.
Memory channel
3.
Weld Assist symbol
4.
Ignition mode (Lift TIG ignition)
5.
Welding current
6.
Wireless remote and its battery status
7.
Remote mode (ON/OFF).
Warning and notification symbols:
a.
General notification
•
Yellow: This is a warning that requires attention
•
Red: There is an error that prevents welding
•
Error code is shown below the symbol
b.
Operating temperature
•
Red: Welding equipment has overheated
c.
VRD (voltage reduction device)
•
VRD symbol on: VRD is on
>> This is always on in power source models where the VRD function is locked on.
•
VRD symbol red (blinking): There is a fault with VRD that prevents welding
•
VRD symbol off: VRD is off.
Tip:
You can switch between the home view and the previously used view by long pressing the menu button.
© Kemppi
24
1921530 / 2052
