Flexlite TX
Operating manual - EN
5. MAINTENANCE
When planning routine maintenance, consider the operating frequency of the welding equipment and the working
environment.
Correct operation of the welding equipment and regular maintenance helps you avoid unnecessary downtime and
equipment failure. Mainly due to the high temperatures, the TIG torch head and parts require regular checks and
maintenance. Periodically, check the cables set for damage and ensure connections are tightened correctly.
Daily maintenance
Disconnect the power source from the mains power supply before handling electrical cables.
Torch head maintenance
•
All insulations are undamaged and intact.
•
Gas nozzle is intact and suitable for work.
•
Shielding gas flows freely and steadily.
•
Electrode is intact and suitable for work.
•
Fastening parts of the electrode are intact and the electrode is fastened tightly in place.
•
Check all the cables and connectors. Do not use them if they are damaged.
Maintenance of torch cable
•
Torch cable insulations and connectors are intact.
•
There are no sharp bends in the torch cable.
•
Components are tightly fastened.
•
Check that the current transfer surface on the torch current connector is clean and undamaged.
•
Check the protective hose on the cable for damage.
For repairs, contact your Kemppi dealer.
Periodic maintenance
Only qualified service personnel are allowed to carry out periodic maintenance.
Check the electric connectors of the unit at least every six months. Clean oxidized parts and tighten loose con-
nectors.
Use the correct tension torque when fastening loose parts.
Do not use pressure washing devices.
Service workshops
Kemppi Service Workshops complete the welding system maintenance according to the Kemppi service agreement.
The main aspects in the service workshop maintenance procedure are:
•
Cleanup of the machine
•
Maintenance of the welding tools
•
Checkup of the connectors and switches
© Kemppi
21
1920910 / 2039
