9
Robot Gun Cleaning Station
© Kemppi Oy 2016
1616
OPERA
TING M
ANU
AL
6.5 The compressed-air motor
This section describes the Robot Gun Cleaning Station’s compressed-air motor.
Table 5: Compressed-air motor
Pneumatic motor’s nominal speed with oiled air
approx. 650 rpm at 6 bar
Air consumption
approx. 400 l/min
Repository volume (anti-spatter fluid)
1 l
Air supply connection
internal width 6 mm
Max. torque
8 Nm
6.6 The injection unit
This section describes the Robot Gun Cleaning Station’s injection unit.
Table 6: Injection unit
Injection unit
1-liter bottle capacity
Operating pressure
max. 6 bar
Max. actuation time
4 s
Consumption of anti-spatter fluid depends on the dosage setting.
6.7 The wire-cutting device
This section describes the Robot Gun Cleaning Station’s wire-cutting device.
Table 7: Wire-cutting device
Cutting capacity at 6 bar
Solid wire
up to 1.6 mm
Cutting time
1.0 seconds
6.8 The type plate
The Robot Gun Cleaning Station unit is labeled with a nameplate on the back as shown
in the figure.
Figure 3: The type plate
Before contacting the service staff, please remember to check the device type, device
number, ID number, year of construction, and switching type.