3
A3 MIG Rail System
© Kemppi Oy 2020
R01
OPERA
TING M
ANU
AL
1. INTRODUCTION
1.1 General
Congratulations on choosing A3 MIG Rail System 2500
welding equipment. Used correctly, Kemppi products
can significantly increase the productivity of your
welding and provide years of economical service.
This operating manual contains important information
on the use, maintenance and safety of your Kemppi
product. The technical specifications of the equipment
can be found at the end of the manual.
Please read the operating manual and the safety
instructions booklet carefully before using the
equipment for the first time. For your own safety and
that of your working environment, pay particular
attention to the safety instructions in the manual.
For more information on Kemppi products, contact
Kemppi Oy, consult an authorised Kemppi dealer, or
visit the Kemppi website at www.kemppi.com.
The specifications presented in this manual are subject
to change without prior notice.
Important notes
Items in the manual that require particular attention in
order to minimise damage and harm are indicated with
below symbols. Read these sections carefully and follow
their instructions.
Note:
Gives the user a useful piece of information.
Caution:
Describes a situation that may result in damage to
the equipment or system.
Warning:
Describes a potentially dangerous situation. If not
avoided, it will result in personal damage or fatal
injury.
Disclaimer
While every effort has been made to ensure that the
information contained in this guide is accurate and
complete, no liability can be accepted for any errors
or omissions. Kemppi reserves the right to change
the specification of the product described at any time
without prior notice. Do not copy, record, reproduce
or transmit the contents of this guide without prior
written permission from Kemppi.
1.2 About the product
A3 MIG Rail System 2500 is a simple battery-powered
welding mechanization equipment for applications
where weaving is not needed. It has been designed for
MIG/MAG welding in flat position and for flame cutting.
STOP
MENU
1.3 Compatibility
A3 MIG Rail System 2500 is compatible with the
following welding equipment:
• All MIG/MAG welding machines, any brand.
• Any manual welding gun with 4T trigger mode.
• Flame and plasma cutters equipped with ON/
OFF switch and 4T trigger mode.