12
A3 MIG Rail System
© Kemppi Oy 2020
R01
OPERA
TING M
ANU
AL
6.3 Service Workshop maintenance
Kemppi Service Workshops complete maintenance according to their Kemppi service
agreement.
The major points in the maintenance procedure are listed as follows:
• Cleaning of the machine
• Checking and maintenance of the welding tools
• Checking of connectors, switches and potentiometers
• Checking of electric connections
• Checking of mains cable and plug
• Damaged parts or parts in bad condition are replaced by new ones
• Maintenance testing.
• Operation and performance values of the machine are checked, and when
necessary adjusted by means of software and test equipment.
7. DISPOSAL
Do not dispose of electrical equipment with normal waste!
In observance of European Directive 2002/96/EC on waste electrical and electronic
equipment, and its implementation in accordance with national law, electrical
equipment that has reached the end of its life must be collected separately and taken
to an appropriate environmentally responsible recycling facility.
The owner of the equipment is obliged to deliver a decommissioned unit to a
regional collection centre, as per the instructions of local authorities or a Kemppi
representative. By applying this European Directive you will improve the environment
and human health.