Kemper PROFILER Remote, Quick Start Manual

Page: 11 / 132

11 PROFILER QUICKSTART
NOISE GATE
Adjust the input Noise Gate intensity with the NOISE GATE knob in
the upper left corner.
Set the volume of your guitar all the way up and put your palm
on the strings so that they are muted. Next, increase the Noise
Gate intensity until the hum and noise produced by your guitar
disappears (usually happens in the range of 4 - 6).
For metal sounds, we recommend adding one of the special noise
gate stomps, which are explained in the Main Manual. There is also
a tutorial video dedicated to the noise gates available on:
www.kemper-amps.com/video
ADDING EFFECTS
The PROFILER features eight effects modules. Four are located
before the amplifier module (pre), and four are located after it
(post). Modules
A , B , C and D are pre amplifier and X , MOD , DLY
and REV are post amplifier.
MOD
NO
ISE GATE
STOM
SYSTEM RIG QUICK
TYPE
Intensity
~4-6
MOD DELAY REVERB
X
MOD DELAY
REVERB
M
AS
TER
VOLU
M
E
NO
ISE
GATE
EFFECTS
OUTPUT