Kemper PROFILER Remote, Quick Start Manual

Page: 17 / 132

17 PROFILER QUICKSTART
LOCK FUNCTION
Certain aspects of a Rig can be locked to prevent them changing
when you load another Rig. Find a Rig which features a wah effect,
then select the wah while holding the
LOCK button. Now, load a
completely different Rig. As you can see, the wah stays at the
exact position. To unlock a module, hold
LOCK and select it.
To display which modules are currently in a locked state, hold the
LOCK button. Any locked modules will remain lit.
POWERED PROFILER WITH GUITAR CABINET
This paragraph is for those who want to use a powered PROFILER
(PowerHead™ or PowerRack™) to drive a guitar cabinet directly.
Please be aware that, generally speaking, the sound of a guitar
cabinet is different compared to that of a full-range cabinet, PA, or
headphones.
Plug your speaker cable into the red SPEAKER OUTPUT on the
rear side.
You are using a physical guitar cabinet as your personal monitor.
This means you need to disable the cabinet simulation for the
signal feeding the internal power amp and your physical guitar
cabinet. You do this by pressing
OUTPUT .
MOD DELAY REVERB
X
MOD DELAY
REVERB
TAP M
AS
TER
VOLU
M
E
NO
ISE GATE
EFFECTS
OUTPUT
QUICK ON/OFF LOCK COPY PASTE
STORE
TYPE BROWSE
EXIT
PROFILING
AMPLIFIER