©
www.kemper-olpe.de
– 06.2020 / K410018800001-00 – 15 /20
●
Connect sampling valve to the angled stop
valve by using the KEMPER compression
connector.
●
Pull the union nut hand-tight and make a
mark with a water-resistant pen.
●
Turn the union nut another 2,5 times to pull
it right (is equivalent to appx. 15-20 Nm).
●
Mount 10 mm connection line in the direction
of the tapping valve on PNV.
●
Mount the draw-off pipe.
●
Open the angle valve and check the PNV for
its functioning.
4.
5
