9
Owner’s manual
eN
Before use, read this instruction manual carefully and keep it for future reference.
Producer does not claim responsibility for damages caused by inappropriate handling
and use of the product.
SAFety iNStructioNS
•
Do not overload device. Operating this device with load higher than nominal may
lead to damaging this device. Do not use the regulator beyond its maximum power
capacity.
• This device is designed for household and office use. Do not use this device with
specialized equipment or apparatuses (e.g. industrial, medical equipment).
•
When the device is connected to any appliance with high momentary starting current,
the starting power is generally several times of the appliance’s listed power rating.
Make sure that the total starting power capacity of all connected appliance does
not exceed the listed maximum output power capacity of the regulator. For tv set,
calculate it twice as its listed capacity.
•
Make sure that the regulator is of the same output voltage and frequency as the
appliance’s it connected.
•
Position the device in a properly ventilated place with suitable temperature.
•
Warning: do NOT cover cooling fan nor vents of the device; it may lead to overheat.
•
Protect this device from water, humidity as well as sources of heat and direct sunlight.
•
Do not use this device if it is not working properly. In such case, turn the device
off immediately, and disconnect from power supply.
•
Do not disassemble this device nor open the housing. Any repair can be carried
out in an authorized service point exclusively.
• In case of fire, use only dry powder extinguisher. Using water or other types of fire
extinguishers can lead to electrocution.
•
Always place the regulator in an environment that is well ventilated, not exposed
to direct sunlight or heat source and away from any flammable substance. Keep this
product out of reach of children.
ProDuct DeScriPtioN
Front panel
1. Power switch (If the load current goes beyond, the power switch will automatically
shut off. To turn it back on, reduce the load current then set the power switch to „ON”)
2. Delay selector (available 180/6 seconds delay; If this regulator is used with appliances
with high momentary starting current, please select „DELAY”, to decrease the risk of
damaging the regulator. In other case, please select „UNDELAY”).
NOTE: DELAY function refers to delay during first start.
This device will countdown time remaining till turning on (respectively to delay
function set time: 180 or 6 seconds). The countdown will be displayed on the screen
(in the output voltage range indication section).
