11
1 .
L O C AT E 4 C E R A M I C C OA L S :
Four ceramic
coals are supplied with the burner base. These coals
must be laid in the position indicated on the drawing
with the taller coals on the ends and smaller coals
in-between.
2 .
L O C AT E L O G N O. 1 :
This is the largest log that
is positioned at the rear of the grate. Two locating pins
are positioned at the rear of the burner. The large log
has two holes on the underside to position in place.
3 .
LOCATE LOG NO’S 2 & 3:
Two front log no’s. 2
and 3 are supplied to fit into the space between the
metal frame and the ceramic base. These logs do not
cover the front burner ports but are designed to
deflect the front flame back into the fire.
L O G S
P O S I T I O N I N G O F
A L L L O G S
• It is important to follow the log
recommended positioning.
• Not doing so can adversely effect the
operation of the appliance.
• This diagram shows the recommended log
positions, when viewed from above.
Only use logs supplied by
the manufacturer as other
logs may effect combustion
performance.
Installation Instructions Kemlan Natural Draft Electronic Ignition Gas Fireplaces
Laying the fire - 700 Ceramic Log
