Kemlan CELESTIAL 900 WITH FAN, Installation & Operating Instructions Manual

Page: 11 / 22

CELESTIAL 900 FASCIA INSTALLATION
INFORMATION
1.OPEN THE DOOR TO ABOUT 70 DEGREES
TO THE FRONT OF THE FIREBOX. LIFT
THE DOOR UPWARDS UNTIL THE DOOR
CLEARS THE HINGES AND MOVE IT OUT OF
THE WAY.
ver.5
2. THREAD ONE SCREW AND ONE WASHER
(SUPPLIED) TO EVERY NUT SERT SHOWN. MAKE
SURE THE WASHER IS AS CLOSE TO THE SCREW
HEAD AS POSSIBLE. LEAVE ENOUGH GAP FOR
THE FASCIA TO SLIDE BETWEEN THE BOX AND
THE WASHER.
3. BEND THE SILICONE TABS INTO POSITION. THIS
TAB SHOULD BE PARALLEL TO THE FRONT OF
THE FASCIA WHEN IN THE CORRECT POSITION.
4. SLIDE FASCIA INTO THE REQUIRED POSITION
THEN HAND TIGHTEN THE SCREWS AS
REQUIRED OR USE AN APPROPRIATE ALLEN
KEY OR PLIERS. USE A TOUCH UP PAINT ON
THE SCREW HEADS AS REQUIRED.
5. RE INSTALL THE DOOR BACK ON. USE THE
REVERSE METHOD TO REMOVAL ON POINT 1.
6. DOUBLE CHECK TO MAKE SURE THE DOOR
CLOSES PROPERLY AND DOES NOT TOUCH
THE FASCIA. THE INSTALLATION SHOULD BE
COMPLETE.
20/08/2020 12