54
5. Short introDuction
-
-
perfect preparation in just a few steps
ON/OFF BUTTON
The On / Off switch is on the right off the display.
With the On / Off switch you control the power off the de-
vice. If you turn off the device, it is in Standby mode.
In Standby mode only the ON/OFF, -Time and Speed control
lamp is on. When you connect the device to an electrical outlet, turn it
on by the On / Off button, to prepare it for the mixing process. Turn OFF
the device using the On / Off switch for overnight, and if you leave the
device unattended.
The ON/OFF switch is on the right hand side of the device.
If the device was switched off by the on / off switch to interrupt a pro-
gram, wait 30 seconds until the power is restored and the timer is reset
before turning on the device over the on / off switch again.
When the pulse, start / stop and program icons light up, the device is
switched on by the on / off switch.
If the device is turned on and you remove the container from the base
unit, the power turns off immediately. If you put the container back on
the base unit, the unit switches to the Standby mode.
MENU
Use the Symbol buttons to select that particular
program.
Summary of Contents for KSB-200
