Kemar KSB-200, Instruction Manual

Page: 44 / 68

44
SaFEty mEaSurES
Never use the device without the lid.
Do not leave your blender unattended when operating.
Any repair and servicing, or the replacement of parts
must be performed by KeMar or an authorised service
representative.
REMARK: The unit need to be rest 1 minutes after
completed one cycle when the unit was running on
max working time (as like bisque function), afterward,
the unit can be running maximum one cycle again.
So, after runned maximum 2 cycles, then, the unit
have to stop working till cooled to ambient tempera-
ture (about 2 hours cool time).
Rotating Blades Can Cause Severe Injury!
DO NOT reach into the container
while the machine is running.