Kelvinator KL72TT User Manual Download

Page: 1 / 20

KL72TT

Twin-tub Washing Machine with Pump

User's

anual

Names of the parts.............the 2

cover

Safety precautions ...............................1

Installation and adjustment ..................3

Introduction of the major functions .......5

Preparation before washing ................6

The musts in washing .........................7

Usage of the detergent .......................8

Washing sequence ..............................9

Disposal after washing .......................13

Contents

Before using

Using process

Trouble-shooting*
Answers to question

.....................15

Specification

..............the back cover

Packing list ......................................17

Please read this manual carefully before using.
Retain it for future reference

Please check if the power receptacle has good earthing
condition before using to guarantee your safety.

The manufacturer will not bear the responsibility for
those risks occurred from not obeying this manual.

Summary of Contents for KL72TT





















Search results

Summary of Contents for KL72TT

Reviews:

Related manuals for KL72TT

Brands by name

Popular brands

Kelvinator KL72TT, User Manual

Search results

Summary of Contents for KL72TT

Reviews:

Related manuals for KL72TT

Brands by name

Popular brands