2 contents
Kelvinator gas continuous flow hot water system
Congratulations and thank you for choosing our gas
continuous flow hot water system. We are sure you will find
your new hot water system a pleasure to use. Before you use
your hot water system, we recommend that you read through
the entire user manual, which provides the description of the
hot water system and its functions.
To avoid the risks that are always present when you use
an appliance, it is important that the hot water system
is installed correctly and that you read the safety instructions
carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet
for future reference and pass it on to any future owners.
After unpacking the hot water system please check it is not
damaged. If in doubt, do not use the hot water system but
contact your local Electrolux Customer Care Centre.
NOTE: The actual gas heating appliance that is part of this gas
continuous flow hot water system will here after be refered
to as "water heater" for the purposes of this manual. The gas
continuous flow hot water system as a whole may also be
refered to as "hot water system" for simplicity.
Meanings of symbols used in this manual are shown below:
warning
This symbol indicates information concerning your
personal safety
caution
This symbol indicates information on how to avoid
damaging the hot water system
environmental tips
This symbol indicates tips and information about
economical and ecological use of the hot water system
environmental tips
Information on disposal for users
• Most of the packing materials are recyclable.
Please dispose of those materials through your local
recycling depot or by placing them in appropriate
collection containers.
• If you wish to discard this hot water system, please
contact your local authorities and ask for the correct
method of disposal.
warning
• Contact an authorised installer for installation of this hot
water system.
• Contact an authorised service technician for repair or
maintenance of this hot water system.
• If the power cord is to be replaced, replacement work
must be performed by authorised personnel only.
• Installation work must be performed in accordance
with national standards by authorised personnel only.
Wrong connection can cause over heating or fire.
• This hot water system should be installed in accordance
with AS/NZS 3000 and your electricity suppliers rules.
Important .......................................................................... 3
Important safety instructions ........................................... 4
Specifications .................................................................... 5
Your gas continuous flow hot water system .................... 6
How it works .................................................................. 6
Initial operation ............................................................... 7
Normal operation ............................................................ 8
Freeze prevention ............................................................. 9
Winter shutdown ............................................................. 9
Maintenance and service ................................................ 10
Water heater draining and filter cleaning ..................... 10
General troubleshooting ................................................. 11
Warranty .......................................................................... 15
Congratulations
Contents
Conditions of use
This hot water system is intended to be used in household
and similar applications such as :
• staff kitchen areas in shops, offices and other working
environments.
• farm houses.
• by clients in hotels, motels and other residential type
environments.
• bed and breakfast type environments.
