Kelvin Hughes
MANTA
DIGITAL
TM
Quick Start Guide:
Chapter
4
:
Getting started
HBK-4002, issue 2 February 2013
Page
5
of
26
4 Getting started
4.1 Switching ON
Ensure that the external AC mains supplies to the display, processor and
all associated
equipment
are switched ON at source.
Processor ON:
Ensure the
MANTA
DIGITAL
TM
navigation processor power switch is in the
ON
position.
Note:
If the processor switch is in the OFF position, the system cannot be started from the display.
Display ON:
To switch the system ON, press the ON/ OFF button on the display control panel:
MantaDigital display control buttons
Startup screen:
The system will now start and the two fans mounted in the MantaDigital navigation processor
will run. During the boot-up/ start-up sequence, the following will appear on-screen:
Start-up screen
After a short delay, the system
will automatically start with the
Kelvin Hughes standby screen.
MANTADigital standby screen
MantaDigital processor power switch:
0 = OFF
I = ON
