Kelvin Hughes
MANTA
DIGITAL
TM
Quick Start Guide:
Chapter
4
:
Getting started
HBK-4002, issue 2 February 2013
Page
15
of
26
4.7.6 Closing tabs and menus
Some dialogs and menus must be closed by clicking on
X
which is
located at the top-right of some tabs/ menus.
Caution
: Some functions may not be accessible until a
menu or tab is closed.
4.7.7 Tick boxes
Some features require a tick-box to be selected. To select a tick box, place the cursor in the
box and left click.
Tick box function
ENABLED
Tick box function
DISABLED
4.8
MANTADIGITAL
Control Interface (MCI) panel
The
optional
MantaDigital Control Interface
(MCI)
panel allows the operator quick access to
common functions including gain, auto-sea and rain clutter, range, EBL and VRM.
Each function is detailed in the relevant section of the
operator’s handbook, i.e. for use of the
Gain control on the MCI panel, see Gain control in
the operator’s handbook HBK-4001 pt 1:
A to Z operators instructions
.
NOTE:
The F1 and F2 buttons are currently not assigned and have no function
MCI panel backlight brilliance
Repeated presses of the
BRILL
button on the MCI panel vary the backlight
for the panel from OFF (1st press) to maximum in 6 steps.
On the 7
th
press the control reverts to OFF and the cycle starts again.
