Kelvin Hughes
MANTA
DIGITAL
TM
Quick Start Guide:
Chapter
4
:
Getting started
HBK-4002, issue 2 February 2013
Page
14
of
26
4.7.3 Drop down boxes
Some functions require the use of a ‘drop down’ box. These are opened by clicking
anywhere within the button. For example; clicking anywhere in the speed sensor box will
produce the drop-down box; sensors can then be selected by left-clicking on any of the items
in the drop down list.
Example of a drop-down box
Speed sensor selection
Clicking inside any part of the button will
produce the drop-down box.
4.7.4 Sensor availability
Where a drop down box is opened, a list of configured sensors will be shown. The colour of
the text determines if the sensor is available for selection:
If the text is
WHITE
, then the sensor is configured for use and
is available for selection.
If the text is
BLACK
, the sensor is configured for use but a
signal is not being received. This could be because the sensor
is switched OFF or has a fault. The sensor cannot be selected.
4.7.5 Tabs
Certain menus are accessed by selecting tabs. These are selected by placing the cursor
over the tab and left clicking.
The text label for a tab may be a different colour.
- WHITE
text means that the tab/ function is enabled and available for selection.
- BLACK
text means the tab cannot be selected because:
a) A signal is enabled but is not being received, e.g. depth.
b) The tab is an
optional feature
that has not been enabled; e.g. CCTV input.
Example of enabled and disabled tabs:
The Spyscope and Wind tabs have
WHITE
text (
tab enabled
).
The Depth and CCTV tabs have
BLACK
text (
tab disabled
).
Pulse Log-Sea
Serial Log (VBW) Sea
