manualshive.com logo in svg

Kelsec TgForce3D, User Manual, Page: 6 / 20

Share
Download
Kelsec TgForce3D User Manual Download Page 6

Version 2.2 

TgForce3D Sensor User Guide 

P a g e

 | 

6

 

 

 

 

Page 6 

Charging and activating the sensor

 

Charging 

Before first use, it is recommended to fully charge the TgForce3D sensor. Plug the provided USB 
charging cable into any USB port. Charging your sensor will take approximately 1-2 hours. When 
charging is complete, the orange LED indicator light will turn off.  

Activating the sensor 

Slightly shaking the sensor will activate it. If the sensor was in sleep mode, LED indicator light will flash 
red 5 times (or red and blue if an iOS device with TgForce App is active nearby). Note that the sensor 
does not have an On/Off Switch. If the sensor has been unused for more than 5 minutes, it will enter 
sleep mode to preserve battery charge. It will also enter sleep mode if the sensor is not paired within 5 
minutes. 

Pairing the TgForce3D Sensor

 

Make sure Bluetooth in enabled in the iOS device settings. The TgForce App will automatically look for a 
nearby TgForce sensor and establish pairing. You can confirm pairing has been successful by looking at 
the Bluetooth icon in the upper left corner of the TgForce App. When successful pairing is established, 
the sensor LED indicator will flash blue 5 times. 
Alternatively, you can pair the sensor manually by selecting the Settings Tab and ‘Find/Connect New 
Sensor'. 

 

 
Pairing has been successfully established. 

 

 
There is no pairing with the TgForce3D sensor.  Try shaking the sensor until pairing 
occur. The sensor may be discharged or you may need to restart pairing using the 
Settings/ ‘Find/Connect New Sensor' option. 

 

 

 

Summary of Contents for TgForce3D





















Reviews:

No comments