Version 2.2
TgForce3D Sensor User Guide
P a g e
|
12
Page 12
The Settings view
Find/Connect New Sensor
If more than one TgForce sensor is active nearby,
you can select one using this function. You also use
this function to pair with a new sensor. Each
sensor has a specific ID number to differentiate
them from other sensors. Use this function if you
encounter issues with automatic pairing of the
sensor.
Impact Monitoring Section
gMax Warning & Adjustment
This is where you can adjust the impact threshold
for receiving and displaying warnings. The red line
in the Session view chart will be set at this value.
Audio Feedback
If activated, the iOS device will generate either a
'Beep' or a 'Drum' sound when the impact level is
above the gMax threshold
Display
For selecting 3D vector or an individual axe (X, Y, Z)
in the session view and the History/Graph view.
Retrieve Data Section
Check and Download data
The TgForce3D sensor records all steps in internal
memory during a running session. Therefore, you can run without the iOS device nearby and recover the
running data at a later time. Please review carefully how the sensor manage the recorded data.
When 'check and Download data' is selected, the sensor will look for the most recent session
with at least 20 steps. All steps will be downloaded for that session.
A new session is restarted if the sensor has not been used for at least 5 minutes. For example, if
you plan to record multiples sessions, you must wait at least 5 minutes (until the sensor goes
into sleep mode) between each running session.
If you do not wait at least 5 minutes, all steps will be recorded in the same session.