Version 1.4
TgForce Sensor User Guide
P a g e
|
15
Page 15
Sensor Calibration
For best performance, you should make sure the sensor is
adequately calibrated. Do a short run with the sensor and
make sure that the number of steps indicated on the main
session view correspond exactly to the number of steps you
did in the session (step count for the leg with the sensor).
If the cadence is sometimes very
low
or the step count
displayed is lower than the actual number of steps.
●
Reduce
the sensor impact threshold value (Settings
view, Advanced Settings, Sensor Threshold). Try
reducing the threshold 1 step at a time.
If the cadence is sometimes very
high
or the step count
displayed is higher than the actual number of steps:
●
Increase
the sensor impact threshold value (Settings
view, Advanced Settings, Sensor Threshold). Try
increasing the threshold 1 step at a time.
●
Increase
Sensor Delay value (ms between each
impact).
