Version 1.4
TgForce Sensor User Guide
P a g e
|
13
Page 13
The Settings view
TgForce Sensor
If more than one TgForce sensor is active nearby,
you can select one using this function. You also use
this function to pair with a new sensor. Each sensor
has a specific ID number to differentiate them from
other sensors. Use this function if you encounter
issues with automatic pairing of the sensor.
gMax Warning & Adjustment
This is where you can adjust the impact threshold
for receiving and displaying warnings. The red line
in the Session view chart will be set at this value.
Audio Feedback
If activated, the iOS device will generate either a
'Beep' or a 'Drum' sound when the impact level is
above the gMax threshold
Real Time Graphic
For selecting bar or line chart in the session view
Advanced Settings
You can fine tune the sensor performance using
the sensor threshold and sensor delay adjustments
Sensor Threshold
This is the minimal impact level required (in g
units) for activating the sensor PPA detection
algorithm. If the sensor is not detecting steps, you may want to reduce the threshold. If the sensor is too
sensitive, you may want to increase this value.
Sensor Delay
To reduce potential false step detection, the sensor will wait a certain amount of time after each step
before listening to new impact signal. You may want to modify this value for special conditions or for
other applications.
