Kelly KHB High Power Brushless Motor Controller User
’
s Manual
V 4.5
Page 6
Chapter 3 Wiring and Installation
3.1 Mounting the Controller
The controller can be oriented in any position which should be as clean and dry as possible,
and if necessary, shielded with a cover to protect it from water and contaminants.
To ensure full rated output power, the controller should be fastened to a clean, flat metal
surface with six screws. Applying silicon grease or some other thermal conductive material to
contact surface will enhance thermal performance.
Proper heat sinking and airflow are vital to achieve the full power capability of the controller.
The case outline and mounting holes’ dimensions of KHB Controllers:
Height: 84 millimeters
Length: 218 millimeters
Figure 1:
KHB mounting holes’ dimensions (dimensions in millimeters)
Controller models with above dimension: KHB12151, KHB12201, KHB12251
KHB12301, KHB12401
KHB14201
，
KHB72601
