7
RECYCLING
Disposal of the product, disassemble and transport to the municipality’s recycling station.
Contact your local authority for further information.
4
2
1
3
3
MAINTENANCE AND SERVICE
Make sure the product is stable and not likely to tip over during maintenance and ser-
vice. Replace damaged and worn parts immediately to reduce the risk of damage. Perform
maintenance,servicing and inspections as recommended. Use only parts with equivalent per-
formance to reduce the risk of damage and failure.
•
Regularly check the condition of the product before failure is a fact. If cracks, twisting,
bending, glitches or fatigue are discovered stop work and rectify the fault. Worn parts
should be replaced.
•
Re-tighten all nuts and bolts after a few hours of driving.
•
Disconnect the equipment from the tractor when rectifying faults.
•
Check all nuts and bolts are tightened after performning maintenance and service.
•
Always test the machine before using it.
•
Lubricate all lubrication points regularly.
For spare parts: Contact Kellfri Service
NO
ART. NO
NAME?designation
QTY.
1
R37-SBATV.001
Wear Resistent Steel Set
1
2
R37-SBATV.002
Adjusting pin with spring
1
3
R37-SBATV.003
Spring
2
4
R37-SBATV.004
Ball couplings 50 mm
1