5
OPERATION
Only people who understand the safety information and operating instructions to operate
this equipment or product. Be alert and cautious while working with the tool or product,
and use only the tool or product in the manner described in the manual. When working with
equipment that has moving parts, there is always the risk of injury. Be careful when working
with equipment equipped with hydraulic hoses ,oil under pressure can penetrate the skin.
Seek medical attention immediately if this occurs.
Always work alone with the tools that are defined as single porpose tools. Respect the equip-
ment’s danger zone.Reduce speed when working on slopes and uneven terrain.
CONNECTING THE MACHINE
• Connect the implement to the tractor’s rear three-point hitch.
• Do not forget to install all the safety pins.
•
Dozer blade with hydraulic steering - disconnect hydraulic hoses to the tractor hydraulics.
•
Ready for use.
Be careful when connecting the blade onto the tractor. Always keep an eye over the tractors
working area during all work with the blade. During operation, pay particular attention so that
the blade do not hit any external obstacles, especially when swinging the blade. Before leav-
ing the tractor cabin, lower the dozer blade on the ground.
Warn
ing!
Never use equipment or products that have defective safety components.
AFTER USE
Parking is not allowed with the equipment above ground, only with the equipment resting on
the ground. Rinse the implement if necessary.
TRANSPORTATION AND STORAGE
Make sure there are no people, children and foreign objects around the area before transport-
ing the machine.Always take an extra caution during the transport. Ensure that the product
is well secured and that transport brackets are mounted. Always place the load as low as pos-
sible.Respect the danger zone even during transport. When lifting the equipment,never go
underneath suspended loads.Trailer used for transport should have working brakes.Always
store the machine in a dry place preferably underneath a cover when not in use. Ensure that
the product is stable and not likely to tip over. Never let children play where the machine is
being stored. Always keep in mind the risk of tipping!
Warning!
To avoid mechanical damage to the blade, always have in mind that when driving with
the blade turned from the tractor (reversing the tractor), the blade does not have the
ability to go over obstacles and unevenness compared to when the blade is turned to-
wards the tractor.Some dozer blade is possible to side shift and to change the angle of
the blade.This is done by adjusting the position of pin that holds the blade and boom
angle. The dozer blade is intended to be used on gravel or tarmac. Max speed: 20 km/h
Summary of Contents for 37-25063S
Page 10: ...10 NOTES ...
