Kellfri 35-XKE240, Manual

Page: 15 / 36

15
Table of Contents
SERVICE INTERVAL MEASURE
Flails Before each use Replace all defective flails. Sharp blades
give better results. When replacing blades,
tighten bolts fully.
While operating Listen out for noises
After each use Check
Gearbox Before each use Check level of oil type: Transmission oil
(approx. 1.5-1.8 L)
50 hours of operation First oil change
100 operating hours or a
minimum of once a year
Oil change
Rotor After 20 hours of opera-
tion
Lubrication
Belts Regularly Check and tighten belt. The belt should
move 20 mm under pressure.
The equipment After each use Wash off earth and grass with water.
Lubrication The first time after two
hours of operation.
After 20 operating hours
Lubricate all points regularly.