Kellfri 35-GUB105, Operating Instructions Manual

Page: 6 / 16

6
Assembly instructions
[35-GUB015 Leaf collector]
NOTE: Right hand (R.H.) and Left hand (L.H.) are
determined from the operator’s position while
he/she is sitting on the tractor.
(Illustration 1) Fit the angle bracket on the collec-
tor’s cover with M8x16 hexagonal screw and lock
nut M8. Check that the bracket is correctly turned
as illustrated and is level with the cover, and tighten.
(Illustration 2) Fit right arm (R.H.) on the cover
with bolt M6x35 and lock nut M6. Do not tighten
yet. Do the same with the left arm (L.H.).
(Illustration 3)
Assemble both arms together
with two M8x65 bolts and lock nut M8. Do not
tighten yet.
If your tractor’s tow hitch has 279 to 330 ground
clearance, see Illustration 4. If your tractor’s tow
hitch has 203-279 ground clearance, see Illustration 5
( Illustration 4 or 5 ) Fit the tow hitch bracket on
the arms with two M8x50 bolts and lock nut M8.
The mounting bolts should straddle the bolts on
the arms. Do not tighten yet.
1
Lock nut M8
Angle bracket
Bolt M8x16
2
Bolt M6x35
M6 Lock nut
3
Bolt M8x65
M8 Lock nut
4
Bolt M8x50
Locking pin
Attachment
Spacers
Flat bar
R-clip
Lock nut M8