10
9.
(Illustration 16)
Tip the collection bag
over and fit support pins in the holes, bend
the pins just enough to fit in the holes.
Important!
Do not bend the support pins
too much. Overbending can cause the pins
to lose their tension.
10.
(Illustration 17)
Feel along the side
tubes on the upper frame to locate the
bottom hole on the side tube. Then make
a hole through the flap.
11.
(Illustration 18)
Thread in a clevis pin
(Ø8x59.5) through the hole and then put
one bag arm on and secure with a locking
pin. Do the same on the other side.
Support pins
16
Upper hole
Side tube upper part
Lower hole
17
Plastic plug
R-clip
Clevis pin
8x59.5
Lower hole
Support arm
for the bag
18
Summary of Contents for 35-GUB105
Page 14: ...14...
