Kellfri 35-FDM160, Manual

Page: 26 / 56

26
Table of Contents >>
Be careful when you turn on gradients or slopes
• The tractor's operating capacity is affected by the weight of the machine. This can lead to
dangerous situations, especially on gradients.
• Danger may arise when the tractor is standing on a slope with the machine in raised position.
• Turning left with the machine in raised position.
• Turning left with the machine in transport mode.
SAFETY DURING OPERATION
• Start the machine only when it is in working mode and only if all protective devices are
correctly fitted.
• Check the area to be cut and remove anything that might cause an obstruction or might
damage or become trapped in the blades, e.g. large stones, pieces of wood etc.
• In the event of a collision, or if the machine hits an obstacle. Stop the machine immediately
and check for damage.
• Always check that there is nothing in the risk zone.
• Use ear defenders during operation.
The scythe mower can be tipped 35°. The wheel drive does not need to be disconnected, and the
tractor's hydraulic arms do not need to be adjusted.
35°
Avoid burns
Never touch the cutterbar or gearbox during operation or immediately after
operation, as these parts are then hot and there is a risk of burns.
Allow the rotary disc mower to cool down before servicing, etc.