3
INTRODUCTION
Thank you for choosing a product from Kellfri AB. Compliance with the safety instructions, operat-
ing manual and sound common sense will guarantee many years of enjoyment using the product.
Kellfri’s equipment and products are aimed at self-employed farmers, horse enthusiasts and other
country-dwellers who have stringent demands on performance.
PRODUCT INFORMATION
•
Electrohydraulic tipper
•
Sturdy floor in 2 mm tread plate
•
Powerful three-stage tipper cylinder
•
Heavy-duty tyres
•
Practical storage box for actuator
A well-built ATV tipping trailer with sturdy floor plate, galvanised for long service life. Electrics and
hydraulics are safely protected under the floor, long three-part tipper ram for large tipping angle
makes the floor easy to clean.
Electricity is supplied from the ATV's 12 V battery and tipping is controlled from an actuator with
cable which is stored in a box on the drawbar when not in use. Please note 12V is required. With less
than 12V it won't work. Check voltage in the event of a malfunction.
1,420 kg load capacity, headboard and tailgate can be opened, jack with crank and 50 mm rotata-
ble drawbar ball hitch.
MACHINE’S FUNCTION
The trailer was developed in order to transport loose materials or branches, etc. up to a max. load of
1420 kg after an ATV.
TECHNICAL DATA
23-TV10H
Length
3450 mm
Width
1250 mm
Height
1110 mm
Floor dimensions L x W x H (mm):
2000 x 1070 x 580
Tyre dimension
22 x 11-10
Tyre pressure
(Note: Maximum pressure must
not be exceeded)
See info on the sidewalls of the tyres
Amount of hydraulic oil
4 L
Hydraulic pressure
16 Mpa
Max. load trailer:
1420 kg
Lifting capacity
1000 kg
Weight
270 kg
Tipper
Electrical hydraulic, 12 V
Engine output
2.2 kW