Kellfri 23-TV07PRO Manual Download Page 6

6

USE

Only those who understand the safety instructions and the operating instructions may use 

the equipment or product. Take caution and care when working with the equipment and only 

use it in the way described in the operating instructions. There is a risk of crushing when work-

ing with equipment that has moving parts. Be cautious when working with equipment with 

hydraulic hoses as oil under pressure can penetrate the skin. Immediately seek medical atten-

tion if this should occur. 

Always work alone with single - purpose tools/ products. Never overload the equipment and 

respect the risk zone.

Check that the trailer is undamaged before connecting it to the vehicle.

• 

Loads must be spread evenly across the trailer. Loads sticking out must be well anchored.

• 

Place the stabilisers on the ground for increased stability when loading.

• 

The brakes on the ATV/tractor must be engaged when loading and unloading.

• 

Point the crane arm in the same direction as the wire has to work.

• 

Calmly and methodically practise the movements used for handling the wire crane.

 

IMPORTANT: 

Only tip the trailer on an even surface.

AFTER USE

Wash down the forestry trailer when required.

TRANSPORTATION AND STORAGE

Check that the work area is free from bystanders, children and objects before driving off. 

Always observe additional caution during transport and moving. Ensure that the equipment 

or product is well anchored and existing transport lashings are fitted. Always position the load 

as low as possible. Respect the risk zone even during transport and moving. Do not permit 

anyone to walk under suspended loads when carrying out lifts. Trailers used for transport 

should have brakes that work. Always keep the equipment or product on a dry surface, prefer-

ably under a roof when not in use. Ensure that the equipment or product is stable and cannot 

fall over. Never permit children to play at the storage site. Be aware of the tipping risk!

Warning! 

Compliance with the safety instructions requires that the product is only used as described 

in these instructions. It is the user’s responsibility to read through the instructions and 

comply with them.

Summary of Contents for 23-TV07PRO

















Reviews: