Kellfri 23-TV07PRO Manual Download Page 16

Tina Baudtler, CMD
2018.08.21

WARRANTY TERMS AND CONDITIONS

Validity of the warranty 

- Kelifri’s Warranty is valid 12 months from the date of purchase.

This warranty replaces 

- Compensation for spare parts after acknowledgment that the
fault lies on the material or manufacturing defects.

This guarantee do not
cover

• 

Labour costs

• 

Travel expenses

• 

Any modification that the buyer himself has/had made.

• 

Any consequential damages that occurred due to damage to the machine.

• 

Damage due to normal deterioration of the machine, inadequate: service, 
user inexperience or use of spare parts which are not original.

• 

Wear parts such as hoses, seals, oils, and mechanical belts

According to 2006/42/EC, Annex 2A
Kellfri AB
Munkatorpsgatan 6
532 37 Skara, Sweden

Declares that the machine

Name: 23-TV07PRO

Type: Tipping and forestry trailer ATV PRO

Complies with all applicable provisions of the Machinery Directive 2006/42/EC.
Other equipment must meet the hardware requirements of the Directive.

CUSTOMER SERVICE

You are always welcome to give your feedbacks, reviews or ask us about our equipment and products.
Kellfri AB is constantly working on further developing their products and therefore reserves the right to 
modify, among other things the design and appearance without further notice.

EC-DECLARATION OF CONFORMITY, ORIGINAL

KELLFRI AB

Phone no: +46 (0)511 - 242 50

Fax: +46 (0)511 - 168 33

E-post: [email protected]

Summary of Contents for 23-TV07PRO

















Reviews: