Kellfri 23-TV07PRO Manual Download Page 4

4

INSTRUCTIONS FOR EMERGENCY SITUATIONS

In case of emergency, call 112.

Always have a mobile phone or emergency phone available when working alone. A first aid kit 

and fire extinguisher must be kept in an easily accessible location when carrying out any work, 

maintenance and service. To perform an emergency stop, turn off the tractor.

PERSONAL PROTECTION

Always use suitable protection equipment. Do not wear loose clothing or jewellery while 

working with the equipment. Long hair should be tied up when working with equipment that 

has moving parts. Use protective gloves as there is a risk of burns if any hot surfaces such as 

exhaust pipes are touched, and avoid getting oil and petrol on skin. Ear defenders must be 

worn whilst the engine is running. Helmets with ear defenders must be used while working 

to prevent knocks from the cabin sides and suchlike in uneven terrain. Wear protective boots 

with anti-slip soles.

WARNING DECALS

Make sure warning decals are always visible and clean them when necessary. Do not use a 

high-pressure washer directly on the warning decal. If a decal becomes worn or in any other 

way unusable, order a new set of decals. An SMV sign must be visible and mounted when 

travelling on public roads.

The forestry trailer is fitted with the following decals:

SYMBOL

EXPLANATION

Read the operating manual! Before carrying out work 
Warning! Before maintenance, servicing, connecting 
and disconnecting the machine, the tractor/ATV must be 
turned off and the ignition key removed. 
Risk zone 15 m
Respect the equipment’s risk zone!
Warning! Risk of crushing!
Do not permit anyone to stand under suspended loads.

Greasing after 10 hours of operation
Always use stabilisers—loading/unloading
Retighten all bolts and connections

Warning! Keep off the machine!
Warning! Accident risk for children!
Children are not allowed in the vicinity of the machine

The product is CE marked

Summary of Contents for 23-TV07PRO

















Reviews: