13
OPERATING THE MACHINE
Only people who understand the safety information and instructions in this manual may op-
erate the equipment. Be alert and careful when working with the machine and only use the
tool or product in the manner described in this manual. When working with equipment that
has moving parts, there is always the risk of injury. Be careful when working with equipment
equipped with hydraulic hoses ,oil under pressure can penetrate the skin. Seek medical at-
tention immediately if this occurs. Always work alone with the tools that are defined as single
purpose tools. Respect the equipment’s danger zone.
•
Place the machine on stable flat surface.
•
Plug the power cord into a grounded 400V and chainsaw on 230V outlet. Always check
that the power cables and electrical connectors are not damaged before use.
•
Check that the engine / hydraulic pump is running in the right direction. Rotation is
changed easily with phase inverter that is mounted on the machine.
•
Press the engine start button, then the machine is ready to use.
•
Always test the shut-off button before each use. Start the machine and press the “OFF”
button, the machine should turn off immediately, do not use the machine if this does not
occur. The machine must not be used until the fault is corrected.
•
After finishing the work, switch OFF the power and unplug.
•
Switch OFF the power and unplug the machine when you leave even if it’s only for a brief
moment. This ensures that no one in particular children can access and maneuver the
machine accidentally while playing.
PHASE INVERTER
After starting the log spliter, check the engine rotation. An arrow that indicates the direction
of rotation is located at the rear of the motor. If the ram does not move forward, this is a sign
that the engine is running in the wrong direction. Stop at once, check and change the engine’s
rotation.
The direction of the motor rotation is changed simply by turning the phase inverter with a
screwdriver.
ON/OFF
SWITCH
ROTATABLE PHASE INVERTER WITH A
SLOT FOR A SCREWDRIVER.
THE EMERGENCY BUTTON SHOULD
BE MOUNTED ON TOP OF THE
ON/OFF SWITCH
CONNETION GLOVE