11
CHECK THE OIL PATTERN
STOPPING THE ENGINE
Warning!
WARNING: Kickback may occur when the nose or tip of the guide bar touches an object, or
when the wood closes in and pinches the saw chain in the cut.Tip contact in some cases
may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the
operator. Pinching the saw chain along the top of the guide bar may push the guide bar
rapidly back towards the operator. Either of these reactions may cause you to lose control of
the saw which could result in serious injury to user.
Release the throttle
Ventilation
AFTER USE
Turn off the chainsaw and unplug the power. Clean the unit before storing. Be extra careful
and make sure the air intake is free from dirt. Use a mild detergent and sponge to clean the
plastic parts. Store in a dry place out of reach of children. Make sure the chain is clean when
storing in a longer period of time and keep the chain saw guide bar chain oiled.
Warning!
Maintain safety.
Dangerous accidents may occur when:
Improper maintenance or removal of safety devices.
Always follow the instructions carefully
Always test the chain saw before performing any operation, check that the chain saw stops as
soon as you release the throttle handle. Do not use chain saw if this does not occur. The chain
saw must not be used until the fault is corrected.