ELECTRICAL CONNECTION
The flashing frequency can change when con-
verting the original indicators. The installation
of a load-independent flasher relay can solve the
problem. If the installation is not possible or not
favored, then parallel connected power resistors
(i.LOAD) will be an option. Only a few vehicles
need special solutions, which we offer as i.SED,
i.BOS and i.LASH products.
ATTENTION! The power resistors will become
very hot after longterm usage of the indicator
lights. Make sure that no components are dama-
ged by this heat.
ATTENTION! The application of the described
measure may interrupt correct functionality,
in the case of a failure causing one of the in-
dicator lights to increase in flash frequency
in order to alert the driver of such a failure.
Before each usage of the vehicle, check the
functionality of the indicator lights.
If you contact us, we will be happy to assist you.
To date, we have been able to help every custo-
mer.
Our team is constantly working on new, impro-
ved solutions for all models and motorcycles. If
you are not sure which electronic equipment you
require, please contact us. Refer to our homepage
at
www.kellermann-online.com
for additional in-
formation and our online shop with a full range of
spare parts and accessories and a download area.
If you have any suggestions or questions, please
do not hesitate to contact us by email (
info@kel-
lermann-online.com
) or call us: +49 (0)241/93 80
8-0. We are happy to assist you.
The Kellermann Jetstream® is equipped with the
tried-and-trusted Long Life Protection Guard®
circuit, which ensures extremely long life with LED
technology. It is not necessary to replace the illu-
minate and, due to the laws for device approval,
it is not allowed.
INDICATOR FLASH RATE
ONLINE SHOP at www.kellermann-online.com
Kellermann GmbH
kellermann_company
Jetstream® DF
Jetstream®
page 5