22
Operating instructions CellaTemp PK / PKF / PKL xx
13 Operating parameters
When you reset/adjust the operating parameters the instrument remains in run
mode� It continues to operate, using the current parameter settings, until you have
finished configuring by pressing [Enter]�
13.1 Setting parameters – general information
1
Select parameter
►
Press [Enter] to access the main
menu�
2
Select output function
Press key [▼] until the required output
function or the Advanced Features is
displayed�
3
Show parameter value
►
Press [Enter]
> Current parameter value is
displayed� *
* The pyrometer will display the parameter value for 30 sec� After that the
display will once again indicate the measurement as a percentage�
4
Change parameter value
►
Press ENTER for 2 seconds,
> display flashes continuously
► Press [▲] or [▼] to change the
parameter
Hold key [▲] or [▼].
> Numerical values scroll through
rapidly
