5 Maintenance and Service
KENOVA set Line V224
Kelch GmbH 2013
Seite 21
Kelch GmbH • Werkstraße 30 • D-71384 Weinstadt-Endersbach • Tel. (+49)7151 20522 0 • Fax (+49)7151 20522 11 • [email protected]
5
Maintenance and Service
5.1 Cleaning
The machine components are supplied with corrosion protection.
Use a
cold cleaning agent
to clean the machine components!
Risk of damage to device through degreasing!
When cleaning the machine components and removing the corrosion protection, do not
use chlorinated hydrocarbons such as PER, TRI, etc. Never use steam jets,
compressed water or compressed air for cleaning! These can cause dirt or cleaning
agents to enter the guides and seals, disabling functions, especially safety functions,
limit switches or measurement systems.
If you use petroleum ether, you should only carry out cleaning in the open air,
taking special safety precautions (fire hazard)
Collect the runoff of cleaning agents and dispose of it properly. Ensure that the live
parts of the unit are kept free of metal chips
You can ensure the functioning of the device by cleaning it regularly with soft, lint-
free cloth and oiling it with preservative such as silicon oil. If the unit is visibly soiled,
you can also clean it using a commercially available cold cleaning agent.
Summary of Contents for KENOVA set Line V224
Page 209: ......
