4 Operation
KENOVA set Line V224
Kelch GmbH 2013
Seite 17
Kelch GmbH • Werkstraße 30 • D-71384 Weinstadt-Endersbach • Tel. (+49)7151 20522 0 • Fax (+49)7151 20522 11 • [email protected]
4.2 Quick
adjustment
To move an axis quickly, proceed as follows:
Hold the handle (2) firmly. The weight of the measuring carriage is compensated by
a compression spring. As a result, you do not require a lot of strength to maintain the
height when the brakes are released.
Unlock the X-Axis (–) and if necessary the Z-Axis (|) by pressing the buttons on the
handle (2).
Move the measuring carriage to the required position. This is generally the position
in which the edge of the tool can be seen on the devices display
Release the button(s) and then the handle.
When you release the buttons, the axis are immediately locked. You can use the
hand wheels to finely adjust the axis throughout the adjustment area.
4.3 Measuring
Carriage
The measuring carriage has to be positioned that the cutting edge of the tool is between
the camera and the light source.
Operation of the control device is described in a separate manual.
4.4 Camera
1 Tool (not included)
2 Tool holder (adapter sleeve)
3 Measuring
carriage
4 Light
source
5 Handle
6 Quick adjustment for X und Z
7 Touchscreen
display
Figure 6:
Detailed view
The cameras measuring position is controlled using the screen at the control device.
When you select a measuring program, you only need to position the edge to be
measured in the display area, since the edges can be determined automatically by the
image processing software.
Summary of Contents for KENOVA set Line V224
Page 209: ......
